Descaling Liquid
To clean boiler & cooling system underway BOILER - COOLER. Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increase usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.
It does not contain toxic cresols or other tar oils that Require SARA Title III, Section 313 spill loss or disposal.
Do not use concentrated 1008 on aluminium surfaces
Uniqueness of 1008 :: --
RXSOL-11-1008-025 Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.
Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form..
Heat Losses in Boiler due to scale
| Thickness of Scale | Increase in fuel consumption due to scale |
| 0.5 mm |
2 %
|
| 1 mm |
4 %
|
| 2 mm |
6 %
|
| 4 mm ( 0.125” ) |
10 %
|
| 8 mm ( 0.25” ) |
|
| 16 mm ( 0.5” ) |
40 %
|
| 30 mm (1” ) |
80 %
|
Scales are damaging the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture, To increase the usable life of cleaned equipment, it is a safe and effective way to remove scale deposits
Descaling Liquid manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Descaling Liquid at a competitive price from us. We have ready stock of Descaling Liquid in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
#DESCALINGchemical_RUSAYLmuscat
#CONDENSORcleaner_OMAN
#scaleREMOVER_UAEdubai
#Descaler_ManufacturerSupplier
RXSOL Descaling Liquid is a special blend of selected acids blended together to attack the various kinds of minerals deposited as scale in a boiler. Added to the special acid blend is a high performance-penetrating agent to obtain maximum penetration. Special inhibitors blended with RXSOL Descaling Liquid prevent the acid from causing excessive damage to metal surfaces.
Directions to use RXSOL Descaling Liquid for BOILER SCALE TREATMENT
Before adding acid to boiler, the steam line should be shut off either by valve or disconnecting line to prevent acid from going into steam line. Hook up circulating pump for circulating acid water in boiler. The pump should be a pump made to withstand acids. A pH of 1 to 2 must be maintained in boiler to obtain optimum results. The amount of boiler acid needed will vary depending on water conditions and the type of scale built up in the boiler. As a starting point, add 5 gallons RXSOL Descaling Liquid to each 100 gallons of water in the boiler. Various makes and models of boilers will vary as to amount of water in boiler.
After acid has been added to boiler water and adjusted to read a pH of 1 or2, start circulating pump and heat water to a temperature of 190° to 200° F. Check pH each 30 minutes and add more acid as the acid dissipates itself dissolving the scale. It is difficult to estimate how much total acid will be needed to acidize a boiler due to various kinds of scale and severity of scale condition. Using a starting point of 5 gallons RXSOL Descaling Liquid for BOILER to each 100 gallons of water and estimate the need of adding 2 gallons every ½ hour per 100 gallons of water for a period of 8 hours would make approximately the total acid needed to acidize a boiler approximately 21 to 29 gallons acid per 100 gallons water depending on an 8 hour or 12 hour acidizing job.
